Hornbach 10589784 Instructions De Montage page 27

Use
Select an installation location without pipes or cables be-
hind it. Make sure the load capacity of the support material
complies with the weight of the installation.
1. Mark the installation holes of the rafter brackets on the
rafter and drill the holes. Choose the screws according
to the thickness of the rafters.
2. Ensure the horizontal level of the rafter brackets.
3. Fix the ceiling brackets of the awning (A) to the raft-
er brackets with bolts/nuts/washers (B). The required
amount of mounting brackets depends on the amount of
ceiling brackets of the respective awning. Please ob-
serve the information in the instructions manual of the
awning.
4. Mount the awning. For detailed mounting information
please consult the instructions manual of the awning.
Please note: At least two ladders or treads are required
(see installation manual of the awning). Ensure that the
ladders/treads are firmly resting on the ground. Only use
ladders/treads suitable for such assembly work.
52 | ENGLISH
1.
min.
100 mm
2.
3.
A
B
Ø 12 mm
ENGLISH | 53