INVENTOR R2-ION8L Manuel D'utilisation page 12

All manuals and user guides at all-guides.com
Press Swing:
When the unit is set on L / M /H, the air guide flaps will change
angles between 90 and 45 degrees. Press again to stop the air guide
at the existing angle
1. LED blinks when the air guide is moving between 90 and 45
degrees.
2. LED goes off when the air guide stops at the existing angle.
Press Ionizer:
Switches On or Off the ionizer.
LED blinks when the ionizer is turned on.
Press Timer:
Sets the unit to power of in 1/ 2 / 4/ 8 hours.
Safety function
When the appliance is tilted at 45º or more, its function will stop
for safety reasons.
The fan will keep working for 4 more minutes at a low speed.
Water Resevoir Full Alert
When the water reservoir is full the alarm will
beep. The icon on the LCD monitor will blink
and the unit automatically stops operating. The
water reservoir must be removed, emptied and
reinstalled before the unit continues operation.
Remove water reservoir in
accordance with the arrow direction
Internal Over Heating Protection
During operating, malfunctions may occur if the air intake or exhaust
are obstructed or blocked by objects. This can cause high internal
temperatures and the unit will automatically shut down. Unplug the
unit immediately and resume operation after 5 minutes.
12