Craftworx 1A-PG612 Manuel D'instructions page 6

How to clean your grinder:
Meat left behind in the grinder head may be removed by passing a slice of bread
through the grinder head
1. Before cleaning up of the grinder, switch the appliance off and unplug from
electrical socket.
2. Remove the meat stomper and meat tray.
3. Lift up the lock handle to release the grinder head from the main body.
4. Unscrew the retaining ring and remove all parts from the grinder head. Hand
wash in warm soapy water. Grinder parts are not dishwasher safe. CLEAN
IMMEDIATELY AFTER USE.
5. Rinse with clear hot water and hand-dry IMMEDIATELY.
6. We advise you to lubricate the knife and the grinding plates with silicon spray.
Tips
◆ Cord storage is under motor housing.
◆ If the grinder is locked, turn grinder off and press the
reverse button. If this does not unlock the grinder, turn the
unit off, unplug the electrical cord from the outlet and
disassemble the grinder head and remove the obstruction.
Reassemble and continue grinding.
◆ Make sure that the over load protector is active. If the over
load protector button bounces up, please press it down to keep
it active.
Warning! Please always stop machine or make sure the
"GRIND/OFF" switch is on "OFF" position before you press
reverse button, otherwise that would damage machine.
5