Key Automation EGKTB1 Instructions Et Avertissements Pour L'installation Et L'usage page 12

5 - ACCESSORY CONFIGURATIONS
The following features allow to customise your keyboard experience; they are not password protected
and are permanently stored.
5.1 – CHANGING THE COLOUR OF THE KEYBOARD
DESCRIPTION
Enter 0020
Enter 0021
Enter 0022
Enter 0023
Enter 0024
Enter 0025
Enter 0026
Enter 0027
Enter 0028
Enter 0029 (standard)
THE OFF condition is useful if the keyboard light may cause discomfort during sleep hours.
5.2 – DEACTIVATING THE AMBIENT LIGHT SENSOR
The keyboard is equipped with an ambient light sensor with which it is possible to turn off lighting
during the day. The setting is cyclic, the preset value is always active lighting.
DESCRIPTION
Enter 001 to disable the sensor
Enter 001 to enable the sensor
5.3 - DISABLING THE BUZZER
The keyboard has a buzzer that can be disabled, the preset value is always active buzzer. This feature
is useful if the keyboard is installed in a bedroom.
DESCRIPTION
Enter 001 to disable the buzzer
Enter 001 to enable the buzzer
6 – DELETING THE CODES
6.1 – DELETING A USER CODE
DESCRIPTION
Start the procedure by pressing and holding simultaneously
the keys and
blue
Type the master code
Type followed by the code of the user you want to delete
Repeat the previous sequence
12
until the lighting on the keyboard turns
COLOUR
OFF
RED
GREEN
BLUE
YELLOW
MAGENTA
CYAN
WHITE
ORANGE
RAINBOW
EXAMPLE COLOUR
001 GREEN
YELLOW
001
EXAMPLE COLOUR
GREEN
001
001 GREEN
EXAMPLE COLOUR
+ 5
BLUE
sec.
max
1234 ORANGE
2 0 2 2
YELLOW
2 0 2 2
GREEN
BEEP
+ > 1s
+ > 1s
+ > 1s
+ > 1s
+ > 1s
+ > 1s
+ > 1s
+ > 1s
+ > 1s
+ > 1s
BEEP
+ > 1s
+ > 1s
BEEP
+ > 1s
BEEP
> 1 s
+ > 1s
> 1s x3
+ > 1s