Publicité
Les langues disponibles
Les langues disponibles
12. Installation of Light Kit Assembly
12.6
Position the Light Switch Pull Chain through the Center
Hole of the Glass Shade .
Position the Fan Speed Control Switch Pull Chain
through the Center Hole of the Glass Shade .
NOTE: Be sure that the fan switch chain does not
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch
chain from touching the light bulbs.
Place the Glass Shade onto the Light Kit Assembly
Threaded Nipple (Figure 33) .
12.7
Pass the Light Pull Chain through the Center Bushing in
the Bowl Cap .
Pass the Speed Control Switch Pull Chain through the
Offset Hole of the Bowl Cap .
Place the Bowl Cap on the Threaded Nipple and
against the Glass Shade (Figure 34) .
Install Finial Nut finger tight to secure the Bowl Cap to
the Glass Shade (Figure 34) .
All manuals and user guides at all-guides.com
THREADED
NIPPLE
Figure 34
20
Figure 33
GLASS
SHADE
BOWL CAP
FINIAL NUT
(Continued)
GLASS
SHADE
SPEED
CONTROL
PULL CHAIN
LIGHT SWITCH
PULL CHAIN
ETL Model No.: CF717-2
Publicité
