Publicité
Les langues disponibles
Les langues disponibles
12. Installation of Light Kit Assembly
12.1
Engage the Color-Coded Connector of the Light Kit
Assembly with the Motor Connector (Figure 28) .
The Two Connectors are keyed and Color-Coded and
must be mated correctly (color-to-color) before they can
be engaged .
Make sure the Connector Latch closes properly .
12.2
Remove the Three Switch Housing Plate Screws and
retain for future use . (Figure 29) .
12.3
Align the Light Kit Assembly Holes with the Switch
Housing Plate Holes .
Carefully tuck all the Wires and Connectors into the
Switch Cup Housing .
Secure the Light Kit Assembly by reinstalling the Three
previous removed Screws (Figure 30) .
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the light kit assembly and the switch cup
plate.
All manuals and user guides at all-guides.com
MOTOR COLOR-
CODED CONNECTOR
18
Figure 28
REMOVE & RETAIN
SWITCH HOUSING
PLATE SCREWS (3)
Figure 29
REINSTALL SWITCH
HOUSING PLATE SCREWS (3)
LIGHT KIT
ASSEMBLY
Figure 30
LIGHT KIT
ASSEMBLY
COLOR-CODED
CONNECTOR
SWITCH HOUSING
PLATE
ETL Model No.: CF717-2
Publicité
