Publicité
STEP 7
After the cabinet is mounted to the wall, drill two 3/16" (5mm) diameter holes into the back rail
(E) and bottom rail (I). Using screws, fasten the cabinet to the wall by screwing through the back
and bottom rails (E&I). Use the same screw location that you used attaching the wall support (F)
so the screws fasten to a stud.
systembuild.com
All manuals and user guides at all-guides.com
(x4)
#A13800
E
F
Drill and fasten screws here.
I
13
Publicité
