Geemarc CLEARSOUND CL7100 Mode D'emploi page 9

OPERATION
1. Make sure that the transmitter/charger is correctly
connected to the mains supply using the supplied
adapter.
2. Put on the headset such that the front(silkscreened)
part of the headset is facing the transmitter.
3. Turn on the headset using the ON/OFF/VOLUME
control and adjust the volume.
4. Use the tone control wheel to adjust the tone
frequency to suit your needs.
5. Use the included balance
adjust the volume balance between the left and right
ears. This control is on the headset.
6. If needed, insert a condenser (electret) microphone
jack into the Mic/Line In socket
headset or connect the audio output of a cell phone
into the same socket using a cable with a 3.5mm jack.
7. When you are finished using the system carefully
place the headset in the charging cradle making sure
that it fits snugly in the cradle. Check that the charging
light turns on.
All manuals and user guides at all-guides.com
8
OPERATION
control tool to
on the