Lights of America 9600LED Serie Mode D'emploi page 4

FinaL assemBLy
1. Push the wires into the junction box. Make sure
none of the wires get pinched.
2. Slidethefixtureassemblyontothemountingscrews.
Tighten decorative nuts removed in step 1 of Instal-
lation section securely against fixture base.
Decorative Nut
Mounting Screw
3. Caulk around fixture base with silicone weather
sealant.
4. Install the three LED Lamps (Lights of America
Model No. 2025LEDE12 included). Note: This
fixture's E12 candelabra base uses either LED
Lamps (1.5W maximum each) or tungsten in-
candescent Type "B" bulbs (60 Watt maximum
each).
5. Insert threaded rod of finial through top cover.Slide
star washer onto rod and thread the nut onto the
rod. Tighten securely.
6. Place top cover onto fixture and attach using
the two decorative nuts (included). Hand tighten
only.
All manuals and user guides at all-guides.com
Junction Box
Finial
Top Cover
Star Washer
Nut
3 Light Bulbs
(60 Watt
Maximum each)
4
Decorative Nut
Fixture
Assembly
598-1338-03