THINK GIZMOS TG635 Manuel De L'utilisateur page 3

1. IMPORTANT INFORMATION
1.1 Quad Bike Battery Installation
● Turn the Quad Bike over so that you can gain access to the underside of the vehicle.
● Making sure that the Power switch is in the OFF position, remove the screw from the battery
cover and remove the battery compartment cover.
● Insert 4x AA batteries (supplied) into the battery compartment observing the correct
polarity as indicated.
● Re-fit the battery cover and secure with the screw.
(Warning - Remove the batteries if the Quad Bike is not going to be used for a long time.)
1.2 Remote Battery Installation
All manuals and user guides at all-guides.com
● The battery compartment is located on the
underside of the controller.
● Remove the screw from the battery cover and
remove the battery compartment cover.
● Insert 2 AA batteries (supplied) into the battery
compartment observing the correct polarity as
shown.
● Re-fit the battery cover and secure with the
screw.
WARNING
Do not mix old and new batteries.
Keep batteries away from small children.
Do not short-circuit batteries or dispose of in a fire.
Remove the batteries if the Quad Bike is not going
to be used for a long time.
3