Beaba EXACTO Mode D'emploi page 42

All manuals and user guides at all-guides.com
Clock / Ambient Temperature / °C /
The first time you use the thermometer or when you change the
battery, you can, if you wish, set the clock and choose the
temperature reading scale, °C (Celsius) or °F (Fahrenheit)
1) Setting the clock
• Open the battery housing
• Press the black button once: the hours will flash
(1a)
• Set the hours using the button on the front face
of the thermometer
• Press the black button once: the minutes will
flash (1b)
• Set the minutes using the button on the front
face of the thermometer
• Press the black button once to end the time-set
operation (1c).
If you do not set the clock, this does not prevent the
thermometer from operating.
Only the Clock / Ambient T° functions will not be available
2) Displays
There are two display modes:
• Mode Clock / Ambient
(figure 2)
The screen alternately displays the
time and the ambient temperature.
This mode is only available if the clock has been set.
If not, at the end of each reading, the thermometer will display
the measured T° for 30 seconds, then "OFF" before switching
off.
Figure 2
T°
Figure 1
a
b
c
41