en
ENGLISH
Original instructions
1. Declaration of Conformity
We declare and accept sole responsibility for
ensuring: these cordless hedge trimmers identified
by their type and serial number *1) conform to all
relevant provisions of the directives *2) and
standards *3). Technical documents for *4) - see
page 3.
2000/14/EC: Conformity assessment procedures in
accordance with Annex V.
Named office *4). Guaranteed sound power level
LWA(G) *5) - see page 3.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 3,
hereby declare under sole responsibility that these
cordless hedge trimmers, identified by type and
serial number *1) on page 3, fulfil all relevant
provisions of following UK Regulations S.I. 2016/
091, S.I. 2008/ 1597, S.I. 2012/3032, S.I.2001/1701
and Designated Standards *3)
S.I. 2001/1701: Conformity assessment
procedures in accordance with Schedule 8.
Guaranteed sound power level *5) - see page 3
2. Specified Conditions of Use
The cordless hedge trimmer is suitable for cutting
hedges and bushes.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Information
For your own protection and for the
protection of your machine, pay attention
to all parts of the text that are marked with
this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your machine only together
with these documents.
4. Special Safety Instructions
a) Keep all parts of the body away from the
blade. Do not remove cut material or hold
material to be cut when blades are moving.
Blades continue to move after the switch is turned
8
off. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
b) Carry the hedge trimmer by the handle with
the blade stopped and taking care not to
operate any power switch. Proper carrying of the
hedge trimmer will decrease the risk of inadvertent
starting and resultant personal injury from the
blades.
c) When transporting or storing the hedge
trimmer, always fit the blade cover. Proper
handling of the hedge trimmer will decrease the risk
of personal injury from the blades.
d) When clearing jammed material or servicing
the unit, make sure all power switches are off
and the power cord is disconnected.
Unexpected actuation of the hedge trimmer while
clearing jammed material or servicing may result in
serious personal injury.
e) Hold the hedge trimmer by insulated
gripping surfaces only, because the blade may
contact hidden wiring. Blades contacting a "live"
wire may make xposed metal parts of the hedge
trimmer "live" and could give the operator an electric
shock.
f) Keep all power cords and cables away from
cutting area. Power cords or cables may be hidden
in hedges or bushes and can be accidentally cut by
the blade.
g) Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.
Inspect hedges and bushes for wire fences and
concealed lines.
Persons under the age of 16 must not used the
hedge trimmer.
Never use an incomplete machine, or one on which
an unauthorised modification has been made.
Do not switch on the machine if parts or guard
devices are missing or defective.
The machine features safety two-hand operation.
Have the machine repaired if it can be activated with
only one switch.
The machine is provided with a "Quick stop"
function. Have the machine repaired if braking time
is clearly lengthened.
Wear ear protectors. Exposure to noise can
cause hearing loss.
Danger of injury from the sharp edges of the blades.
Never touch the blades. Wear protective gloves.
Always wear protective goggles, gloves, and
suitable shoes when working with the hedge
trimmer.
Always hold the machine with both hands and stand
firmly on the ground. The hedge trimmer is intended
for work where the operator stands on the ground
and not on a ladder or any other unstable floor
space. Pay attention to obstacles in the working