Publicité
Les langues disponibles
Les langues disponibles
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
The Unifx 1C mounting bracket is designed to fix your Unisun panels only. It has been designed to
be used on a flat surface (ex.: campervan roof, houseboat).
SAFETY INSTRUCTIONS
•
Take the appropriate mesures to prevent accidents during your mounting steps.
•
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
Obtain and Read carefully the safety instructions for the SIKA glue and its preparer on website
www.quickfds.com.
•
When finished and after 72h, check and ensure that all of your brackets and panels are fixed
properly. We recommend to operate an adhesion test 72 hours after sealing.
UNIFIX - COMPOSITION
I
Provided elements
x4
x1
glue
For the preparation of the surface before gluing the brackets: only use a wet cloth and the
degreaser provided. Do not use alcohol/white spirit...
Respect 48 to 72 hours of drying time. Do not move or manipulate during this time.
Sika flex must be applied at a temperature between 5°C and 35°C, the optimum application
temperature being between 15°C and 25°C.
When finished and after 72h, check and ensure that all of your brackets and panels are
fixed properly.
x4
D5
x12
X1
Degreaser
Preparer
www.uniteck.fr
D5
x12
For the mounting, make sure
you have a slightly wet cloth
for dusting and a dry cloth for
degreaser-preparer application
M5
x12
EN
9/22
Publicité
