Uniteck UNIFIX 1.C35 Mode D'emploi page 11

UNIFIX – PANEL FIXING
• Place your panel in the desired position (without glueing)
•
Place a mark around the brackets to visualise the final mounting zone.
•
Remove the angles from your panel then Put the glue on your 4 brackets as indicated in white on
the picture
Recommendations : Apply glue in lines 1,5 to 2,5 mm in order to improve polymerization time
and efficiency.
• P l a c e the brackets on the previously marked surfaces. Press briefly down on the brackets.
Respect 24 to 72 hours of drying time. Do not move
!
or manipulate during this period.
During this waiting time, you can fix the roof pass (cf roof pass part).
www.uniteck.fr
EN
11/22