Redfox RIB 3535 ET/N Notice D'installation Et D'emploi page 10

2 5 5 3 4 1 7
6
Cooking time will be indicated at the display by counting down the minutes. When cooking time is
-
ctions can be adjusted manually by pressing the corresponding buttons. We recommend to follow
Do not put empty cook ware on the appliance and do not leave cookware too long on the appliance
to avoid completely boiling away of the liquid. Overheating of cookware will activate the boil dry
protection of the device.
etely.
Safety functions
-
then EO for error. Multiple acoustic signals will resound and the unit will be automatically switched
into
lf you remove the cookware while the appliance is in operation multiple acoustic signals will resound
and the display will show EO for error. The appliance will stop to heat and will switch into StandBy Mode
within approximately 1 minule. When replacing the cookware onto the glass surface, you need to push the
lf the unit displays the error code E1 it shows temperature sensor overheat This can happen when
temperature of the plate is too high. The unit will stop heating. E1 will disappear and the plate will
function again automatically when the appliance has been cooled down. Also when the sensor is aut
of order, E1 appears immediately and the machine will shut down immediately.
lf the unit displays the error code E2, it has been overheated by too hot cookware. The boi I dry protec-
tion activates. ln this case unplug the appliance and let it cool down completely. When E2 is displayed
the whole induction cooker including the temperature control setting will be completely locked up.
stand-by mode.
8
10