Publicité
Les langues disponibles
Les langues disponibles
If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the
checklist below.
Any other servicing should be done by an authorized service representative.
To reduce the risk of personal injury – Unplug before cleaning or servicing.
PROBLEM
POSSIBLE CAUSE
Cleaner won't run Power cord not firmly plugged
into outlet.
Blown fuse or tripped breaker.
Needs service.
Thermal protector activated.
The Performance
Dirt cup not installed
Indicator is red or
correctly.
the cleaner won't
Dirt cup full.
pick up or low
Brushroll worn.
suction
Broken or worn belt.
Clogged filter.
Nozzle/brushroll clogged.
Hose clogged.
Dust escaping
Dirt cup full.
from cleaner
Dirt cup not installed
correctly.
Hose not installed correctly.
Filter not installed completely.
All manuals and user guides at all-guides.com
4. TROUBLESHOOTING
WARNING
!
POSSIBLE SOLUTION
Plug unit in firmly.
Check fuse or breaker in home. Replace fuse/
reset breaker in home.
Take to service center. To find nearest location,
visit our website at www.hoover.com or call
1-800-944-9200.
Allow cleaner to cool for 30 minutes (this will
reset the thermal protector).
Review dirt cup removal & replacement.
Empty dirt cup.
Replace brushroll.
Replace belt.
Remove filter and clean
Check nozzle/brushroll; remove obstruction/clog.
Remove hose; remove clog.
Empty dirt cup.
Review dirt cup removal & replacement.
Review hose installation.
Review filter removal and replacement.
12
!
Publicité
