Publicité
Les langues disponibles
Les langues disponibles
BEFORE USING FOR THE FIRST TIME
1.
Carefully unpack the Popcorn Popper and remove all packaging materials.
2.
Wash measuring cap/butter tray and clean Popcorn Popper lid in warm,
soapy water; rinse and dry thoroughly.
3.
Place the Popcorn Popper base on a clean, flat, heat-resistant working surface.
CAUTION: During popping, the unit gets hot. Make sure the surface is able
to withstand heat or use a trivet to protect the working surface.
4.
Wipe with a clean, damp cloth and dry thoroughly.
5.
The Popcorn Popper is now ready for use.
OPERATING INSTRUCTIONS
1.
Remove Popcorn Popper lid and measuring cap/butter tray.
Fill one level measuring cap with kernels and add to popping chamber.
One level measuring cap of popcorn kernels =
CAUTION: Never add more than 1 measuring cap or
to the popping chamber at one time. Do not put any other ingredients such as oil,
shortening, butter, margarine, salt or sugar into popping chamber as damage
will occur. Do not overfill.
2.
Place Popcorn Popper lid onto the Popcorn Popper base, positioning bottom edge
of Popcorn Popper lid into grooves of the base. Place measuring cap/butter tray
onto Popcorn Popper Lid.
CAUTION: Never pop corn without Popcorn Popper lid and measuring cap/
butter tray in position.
3.
Place a 4-qt. or larger bowl or rectangular container under the chute. The bowl
should not be more than 6 inches high, so that air can circulate freely under
the chute. Choose a heat-proof bowl. If a plastic bowl is used, be sure
it will withstand heat without melting. A metal bowl may become hot to the touch,
but it will tend to keep the popcorn warmer.
4.
Plug unit into a 120 V AC outlet and press the ON/OFF switch to ON (|).
Using the measuring cap to melt butter:
5.
The measuring cap/butter tray may be used to melt butter while the unit pops
the kernels. For best results, cut butter into
cap. Allow butter to come to room temperature. Never add more than
of butter to the measuring cap. Use the handle of the cap to remove melted butter
from the Popcorn Popper lid.
Always wash and dry the measuring cap/butter tray after each batch of buttered
popcorn. Always use a clean measuring cap to measure kernels.
6.
Press the ON/OFF switch to OFF (O) and unplug the unit when popping is complete.
CAUTION: Never operate the Popcorn Popper when empty.
7.
Due to variances in the popcorn type, freshness and moisture content,
some popped or unpopped kernels may remain in the popping chamber
after the popping has stopped. To prevent scorching, unplug the Popcorn Popper
without waiting for this corn to clear the unit.
CAUTION: AS KERNELS MAY CONTINUE TO POP EVEN AFTER UNIT
IS UNPLUGGED, MAKE SURE ALL POPPING HAS STOPPED BEFORE
REMOVING COVER.
CAUTION: USE OVEN MITTS WHEN HANDLING HOT SURFACES OF THE HOT
AIR POPCORN POPPER. ALLOW POPCORN POPPER LID TO COOL ON
THE POPPER BASE AFTER POPPING.
SO-309449_13554 BELLA Hot Air Popcorn Maker IM_r4.indd 6
All manuals and user guides at all-guides.com
6
⁄
cup.
1
3
⁄
cup of popcorn kernels
1
3
⁄
inch slices before placing in measuring
1
4
⁄
cup
1
4
2014-09-04 10:21 AM
Publicité
