Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
unit and stick it to the door/window frame. Peel the paper off of the magnet (Note: both the alarm unit and the magnet have a
triangle symbol on it - this indicates their closest position - see above image) and stick it to the other frame on the corresponding
location. Important: The space between the alarm unit and the magnet should be between 1 and 9mm. Once installed, run a test
by pressing the SET button to make sure the system works properly. You should hear the alarm sound.
Example of Window & Door Alarm installation
Batteries
When the batteries are reaching the end of their capacity, the alarm time will be shorter and the loudness will gradually go down.
Replace the batteries when this happens. The alarm uses 3 x LR44 batteries (see image below). Please check your Alarm units and its
proper function on regular intervals to assure proper function and optimal security for your home.
Technical Parameters
Working Voltage: 3 * LR44 button batteries (4.5V)
Standby Current: <10mA
Working Current: <70mA
Publicité
