Télécharger Imprimer la page

Tiiwee TWWA01 Mode D'emploi page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Instructions for use
-
Keep alarm and magnet together (side by side)
-
Activate the device with the slide-switch on the side to activate Full Alarm Mode
The alarm is now in full alarm mode: a strong alarm will be heard when the door is opened, and it will sound
o
for one minute unless the SET button is pressed.
Pressing the SET button will stop the alarm sound but the window alarm device itself will stay in full alarm
o
mode. The next time the door is opened the strong alarm sound will be heard again.
-
Chime mode: Quick-press the SET button once from Full Alarm Mode
2 beeps will be heard
o
each time the door is opened, a Chime sound will be heard once. This is the mode used for friendly
o
notifications of people entering the house or shop
-
Open door Alarm mode: Quick-press the SET button twice from Full Alarm Mode
3 beeps will be heard to confirm the setting
o
In this mode, an alarm sound will be heard if the window is open. However, the alarm sound will stop as soon
o
as the window is closed again.
-
Open Door Notification mode: Quick-press the SET button 3 times from Full Alarm Mode
4 beeps will be heard as a confirmation of this setting
o
each time the door is opened, 3 loud beeps will sound each 3 seconds to notify that the door is open as long as
o
the door or window is open.
Important
Each time the SET button is pressed the next mode is activated, and after the last mode (Open Door Notification) the device will go
back to Full Alarm mode, Chime mode, etc respectively when pressing the SET button. The device will remember its last setting when
it is switched off. The next time the unit is switched on it will enter the last-used mode.
Installation Guide
The adhesive tape is pre-cut to fit the shape of the alarm unit and the magnet.
Peel off the protective paper from one side and apply them to the back side of each the alarm unit and the magnet.
Mounting
Carefully clean the location where the alarm is intended to be placed. Remove the other side of the protective paper of the alarm
All manuals and user guides at all-guides.com

Publicité

loading