Publicité
Les langues disponibles
Les langues disponibles
Installation requirements
Electrical requirements
The wiring diagram is located on the plate
under the control panel or rear frame.
WARNING
• Improperly connecting the equipment
grounding conductor can result in a
risk of electric shock. Check with a
qualified electrician or serviceman if
you are in doubt as to whether your
dryer is properly grounded. Do not
modify the plug provided with your
dryer – if it doesn't fit the outlet, have
a proper outlet installed by a qualified
electrician.
• To prevent unnecessary risk of fire,
electrical shock, or personal injury, all
wiring and grounding must be done in
accordance with local codes, or in the
absence of local codes, in accordance
with the National Electrical Code, ANSI/
NFPA No. 70-Latest Revision (for the
U.S.) or the Canadian Electrical Code CSA
C22.1 – Latest Revisions and local codes
and ordinances. It is your responsibility
to provide adequate electrical service
for your dryer.
• All gas installations must be done in
accordance with the national Fuel Code
ANSI/Z2231 – Latest Revision (for the
U.S.) or CAN/CGA – B149 Installation
Codes – Latest Revision (for Canada)
and local codes and ordinances.
14
English
DV8700K-03170T-00_EN (US)_151130.indd 14
All manuals and user guides at all-guides.com
Grounding
This dryer must be grounded. In the event
of a malfunction or breakdown, the ground
will reduce the risk of electrical shock by
providing a path of least resistance for the
electrical current.
Gas models
• Your dryer has a cord with an
• Do not modify the plug provided with
• Do not connect the ground wire to
Electric models
• Your dryer has an optional cord with
• The plug must be plugged into an
• Do not modify the plug provided with
WARNING
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
your dryer – if it doesn't't fit the outlet,
have a proper outlet installed by a
qualified electrician.
plastic plumbing lines, gas lines, or hot
water pipes.
WARNING
an equipment-grounding conductor
and a grounding plug. This cord is sold
separately.
appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
your dryer – if it doesn't't fit the outlet,
have a proper outlet installed by a
qualified electrician.
2015-11-30
12:26:42
Publicité
