Publicité
Les langues disponibles
Les langues disponibles
Battery
Battery
Inside Chime
Chime does not sound:
• Make sure push button and chime codes are the same (See pages 2 and 3).
• Check orientation of push button battery (See page 3).
• Check charge of push button and chime batteries, replace if necessary.
Batteries seem OK, but the chime does not work when installed:
• Do not mount chime or push button on metal or near metal studs. This
reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to
move chime or push button off metal surface.
• Concrete floors may reduce range. Move chime away from floor.
• Try locating chime closer to push button.
The range of the wireless chime can vary with location, temperature and bat-
tery condition.
ACE
reserves the right to discontinue and to change specifications at any time
®
without notice without incurring any obligation to incorporate new features in
previously sold products.
598-1075-03
All manuals and user guides at all-guides.com
Push Button Battery Replacement
Install an alkaline type A23 12 Volt battery. The
positive terminal should be positioned as shown.
Tune Setting
Inside Push
(Not used on
all models)
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Troubleshooting
* Code Settings 1-7
Must Match Both
Push Button and
Button
-3-
Chime
Tune
Setting
Publicité
