Ace 3035748 Mode D'emploi

This package includes:
• Wireless chime
• Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime. In typical use,
alkaline batteries will last three years.
1.
Open chime case:
Press in catch on bot-
tom of chime and lift
the case open.
3.
Test Range. Temporarily position chime where you want it mounted. Press
push button to verify chime and push button work properly. If chime does
not sound, see Troubleshooting.
Chime can be mounted by using 3 holes in the back of case, or by using 2
screws with keyholes.
Holes
for Wall
Mounting
Chime Back
Case Mounting
Snap front of chime case on. Start with top edge of case aligned with the top
of back plate.
© 2007
All manuals and user guides at all-guides.com
Accessory Receiver
Chime
Volume
4.
Mount accessory chime.
3-5/16"
(8.4 cm)
Chime Back Case
Keyhole Mounting
Wireless Chime
Model 3035748 (AC-6195)
2.
Install the 3 al-
kaline "D" bat-
teries. Make
sure batteries
are or iented
properly.
Close Chime Case
598-1075-03