Important Information; Meanings Of Signal Words; Safety - Hitachi CC 14SC Mode D'emploi Et Instructions De Securite

IMPORTANT INFORMATION

Read and understand all of the operating instructions, safety precautions and warnings in the Manual before
operating or maintaining this power tool.
Most accidents that result from tool operation and maintenance are caused by the failure to observe basic
safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation
before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identified by WARNINGS on
the tool and in this Manual.
Never use this tool in a manner that has not been specifically recommended by HITACHI, unless you first
confirm that the planned use will be safe for you and others.

MEANINGS OF SIGNAL WORDS

WARNING: Indicates a potentially hazardous situations which, if ignored, could result in serious personal
injury.
CAUTION: Indicates a hazardous situations which, if ignored, could result in moderate personal injury, or
could cause machine damage.
NOTE: emphasizes essential information.

SAFETY

SAFETY RULES FOR POWER TOOLS.
READ ALL OF THE WARNINGS AND OPERATING INSTRUCTIONS IN THIS MANUAL
BEFORE OPERATING OR MAINTAINING THIS TOOL:
WARNING:
When using this electric tool, take all necessary precautions to minimize the risk of electric
shock or other personal injury.
In particular, always comply with the following safety rules:
1. ALWAYS KEEP GUARDS IN PLACE
2. ALWAYS REMOVE ADJUSTING KEYS AND WRENCHES BEFORE STARTING TOOL.
Always confirm that all keys and adjusting wrenches have been removed from the tool before it is turned
on.
3. ALWAYS KEEP WORK AREA CLEAN.
benches.
4. NEVER USE TOOL IN HAZARDOUS ENVIRONMENTS.
places, and never expose them to rain. Always keep the work area well lighted.
5. KEEP CHILDREN AWAY.
6. MAKE WORKSHOP KID PROOF
7. NEVER FORCE THE TOOL.
it was designed.
8. ALWAYS USE THE RIGHT TOOLS.
not designed.
9. ALWAYS WEAR PROPER APPAREL WHEN WORKING WITH THE TOOL.
clothing, gloves, neckties, rings, bracelets or other jewelry which may get caught in the moving parts.
Always wear non-slip footwear, preferably with steel toes. Wear protective hair covering to contain long
hair.
and in working order.
Avoid injuries by not cluttering the work areas and work
All visitors should be kept safe distance from work area.
with padlocks, master switches, or by removing starter keys.
It will do the job better and more safely if it is operated at the rate for which
Never force a tool or an attachment to do a job for which it was
Never use power tools in damp or wet
Never wear loose
English
3