Publicité
Les langues disponibles
Les langues disponibles
4. Functions
A single distance measurement
Press the key: switch on the laser. Press the button again, measurement starts.
The measurement data are displayed on the screen.
Continuous measurement
Long press this button, continuous measurement, Max/Min value will be
displayed.
Continuous measurement can allow the user to measure the maximum/minus
distance of one measuring point. For example, measuring the Diagonal distance
(maximum value) of the room or the Horizontal distance (Min value).
Press this key without moving until it beeps, that means the device enters into
continuous measurement, sweeping large area around the measurement target
by laser (ex: angle).
Press to stop the continuous measurement. The corresponding max/min values
and the last measured data are displayed on the main screen.
The instrument will exit the mode of continuous measurement automatically after
you have measured continuously for 100 times.
13
Publicité
