Publicité
Les langues disponibles
Les langues disponibles
The first operation and turn on the power
MEAS: Press this button for about one second to turn it on. Press shortly to turn
on the laser, press again to access the measurement data, press long to access
the continuous measurement condition.
OFF/CLEAR:
1. Press and hold this button to switch it off, after 45 seconds of not being used it
will switch off automatically.
2. Clear button, cancel the last instruction or clear the display.
Plus/ min/ unit:
Plus: Press this button briefly, the first display line will shine plus number.
The next reading will be plus the previous reading.
Min: Short press this button again, the first display line will be shiny minus
number. The next measuring value will be minus the previous one.
Unit: Long press the button(+,- UNIT ), change the distance units until the desired
units are displayed: m, in, ft, ft+in.
Distance
Area
1 0,000 m
0.000 m
2 0 1/16 in
0.000 ft
3 0.000 ft
0.000 ft
4 0'00'' 1/16
0.000 ft
3. Date / Backlight on/off
Date:
The position of measuring reference edge (please see the diagram)
The taking reference edge of the instrument is the back porch.
Keys: Multi-function stand, leading edge and back porch will be chosen as
measuring reference edges respectively. When you change the measuring
reference edges, there will be several beeps to remind you.
Press this key to set the benchmark after restart, the measuring reference edges
will be back to the acquiescent reference edge (back porch). Long press this key,
backlight will be on or off.
Volume
2
0.000 m
3
2
0.000 ft
3
2
0.000 ft
3
2
3
0.000 ft
12
Publicité
