Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
3.4
SUCCESSIVE TIMING OPERATIONS (LAP TIMES)
To carry out successive timings, all you need to do is stop
and start the chronograph as many times as needed by
pressing push-button
ponding hands are not reset, but restart directly from
their stop position. The chronograph can be reset to zero
by pressing push-button
4 .
S T A R T I N G T H E C O U N T E R S
After changing the battery, or exceptionally, when there
has been a problem, the counters need to be initialised
(set to zero) before starting the chronograph. If neces-
sary, proceed as follows:
1. Set the hand on the hour counter to zero
in position B, push-button A).
2. Set the hand on the 60-minute counter to zero
(crown in position B, push-button B) .
3. Set the hand on the seconds counter to zero
(crown in position B, push-button A) .
4. Set the hand on the 1/10 seconds counter to zero
(crown in position B, push-button B) .
A
located at 2 o'clock. The corres-
B
located at 4 o'clock.
7
7
9
(crown
6
7
8
Publicité
