SAN MARCO 100 Serie Manuel D'instructions Pour L'emploi page 49

11.2 Safety valve
The safety valve is installed on the upper part of the boiler, in the part corresponding to the area occupied
by the steam. The valve is activated if there is a considerable pressure increase inside the boiler. The valve
rapidly lowers the pressure by expelling the steam in the atmosphere (the valve trips in at 2÷2.5 bar). If the
safety valve trips in, the steam is held and dissipated inside the machine frame, so as to avoid hazards for
the persons around the machine.
12. Information for users in the european community
Pursuant to European Directive 2002/96/EC on electrical waste (WEEE), users in the Europe-
an community are advised of the following.
13. Guarantee
The warranty becomes void if:
recommendations of this manual, improper operation, abuse, lightning and atmospheric phenomena,
overvoltage, overcurrent, or insufficient or irregular power supply.
14. Declaration of conformity
The manufacturer:
La San Marco S.p.A.
34072 Gradisca d'Isonzo (GO) Italy – Via Padre e Figlio Venuti, 10
phone (+39) 0481 967111 – fax (+39) 0481 960166 – http://www.lasanmarco.com
declares under its own responsibility that the espresso coffee machine described in this manual and identified
by the data on the tag located on the machine, is compliant with directives 98/37/EC, 2006/95/EC, 89/336/
EEC, Regulation (EC) No 1935/2004. For verification of compliance with said directives, the following harmo-
nized standards have been applied: EN 12100-1, EN 12100-2, EN 60335-1, EN 60335-2-75
Gradisca d'Isonzo, March 2009
Managing director
Mr Roberto Marri
40
All manuals and user guides at all-guides.com
-