Zyxel ZyWALL 2 Plus Guide De Démarrage Rapide page 3

Do the following to make hardware connections for initial setup.
1 Use an Ethernet cable to connect a LAN port to a computer.
2 Use an Ethernet cable to connect the WAN port to your broadband modem or router.
Use the blue console cable if you want to connect the CONSOLE port to
your computer. Use the black dial backup cable if you want to connect the
DIAL BACKUP port to an analog modem.
3 Use the included power adaptor to connect the power socket (on the rear panel) to a
power outlet.
ENGLISH
2