Zyxel ZyWALL 2 Plus Guide De Démarrage Rapide page 11

Your settings are not saved when you click Back.
2 Use this screen to configure the gateway
policy.
Name: Enter a name to identify the
gateway policy.
Remote Gateway Address: Enter the IP
address or domain name of the remote
IPSec router.
ENGLISH
3 Use this screen to configure the network
policy.
Leave the Active check box selected.
Name: Enter a name to identify the
network policy.
Select Single and enter an IP address for
a single IP address.
Select Range IP and enter starting and
ending IP addresses for a specific range of
IP addresses.
Select Subnet and enter an IP address
and subnet mask to specify IP addresses
on a network by their subnet mask.
10