Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
SPECIFICATIONS
Capacity
:
Voltage
:
Wattage
:
Cord
:
USING YOUR COFFEE MAKER
Before first use, please follow these instructions:
1. Remove all packaging and any labels,
2. Fill to the maximum level mark with fresh water, boil and empty the coffee
maker at least 2 times to clear coffee maker of any tiny particles. Do not drink
the water.
3. Cleaning all the detachable parts, such as the grinder box, filter, filter holder
and so on completely.
Set the clock
1. Once the appliance is connected to power supply, 88:88 will display and flash on
the LED display, after 5s, the LED will display 12:00.
Note: If you do not set the clock, you can go directly to other settings.
2. Press the "program" button once (see LED display). You are now in the
"Time Set" mode and can operate either "hr" or "min" button to achieve the
desired setting.
3. Confirm the clock setting by waiting for 15 seconds.
4. The buttons can be held down to scroll through the digits, or pressed and
released lightly to advance one digit at a time.
Note: The time cycle is 24 hours (the details refer to the LED display).
To set the program time
If you do not want the coffee maker start operation immediately, you may set the
automatic start function as follows:
1. After set the clock (suppose the current time is 13:30). Press the "program"
button twice. You will enter the state of "preset the automatic start time"(see
LED display). The desired time can be set by pressing the" hr" and "min"
buttons to scroll forward through the digits.
2. When the desired time setting approaches, press the on/off button twice.
The indicator of program will be illuminated. When the preset time achieves
and the indicator of program will be extinguished. The indicator of on/off will
be illuminated and the coffee maker will start to brew.
Note: you can see the automatic start time by pressing the "program". You
can determine the display time is programmed time or current time by
seeing the lower indicator on the LED (the details refer to the LED display)
3. If you want to cancel the preset program, press the on/off button twice. The
appliance will start to brew immediately.
4. Reset the "automatic start" mode, only following the steps 1-2 again.
1.5 Liters / 12 cups (125 ml / cup)
AC 220-240V / 50Hz
1000W
3-pin grounded plug. (to reduce risk of electric shock)
Publicité
