Conrad 396453 Mode D'emploi page 28

All manuals and user guides at all-guides.com
c) Dehumidify (DEHUM)
•. Select the operating mode "Dehumidify". The indicator light DEHUM (22) will light up.
•. The temperature, the sleep mode, and the fan speed (HIGH/LOW) cannot be set.
Keep.doors.and.windows.closed.to.achieve.a.better.dehumidification.performance..
d) Fan (FAN)
•. Select the operating mode "Cooling". The indicator light FAN (23) will light up.
•. Push the key (31, 40) to select a high or low fan speed. With a high fan speed, the indicator light HIGH (16) will
light up. With a low fan speed, the indicator light LOW (17) will light up.
•. Temperature and sleep mode cannot be set.
e) Timer (TIMER)
Automatic on
•. You can specify the time until the device switches on automatically from standby mode.
•. Push the key (30, 35) to select the desired time period (1 – 24 hours).
•. The indicator light TIMER.(18).lights.up.and."01".(=1.hour).will.flash.on.the.display..
•. Push the key (30, 35) repeatedly to select the desired time period. For example, if you would like to set three
hours, push the key
•. Once.the.hour.display.stops.flashing.your.settings.are.confirmed.
•. To switch the timer off, push the key
TIMER (18) will go out.
•. The device switches on automatically after the pre-set time has elapsed.
Automatic off
•. When the device is switched on, you can specify the time until the device switches off automatically.
•. Push the key (30, 35) to select the desired time period (1 – 24 hours).
•. The indicator light TIMER.(18).lights.up.and."01".(=1.hour).will.flash.on.the.display..
•. Push the key (30, 35) repeatedly to select the desired time period. For example, if you would like to set three
hours, push the key
•. Once.the.hour.display.stops.flashing.your.settings.are.confirmed.
•. To switch the timer off, push the key
TIMER (18) will go out.
•. The device switches off automatically after the pre-set time has elapsed.
f) Sleep mode (SLEEP)
•. Select the operating mode "Cooling". The sleep mode is possible only in the operating mode "Cooling".
•. Push the key (27, 39) to enter sleep mode. The fan speed is set on low.
•. Once you selected the sleep mode, the temperature will increase by 1 °C after one hour. After another hour, the
temperature will again increase by 1 °C and will then remain constant.
•. The sleep mode is not possible ,
- if the water tank is full (indicator light W.F = "Water Full" will light up).
- if the devices in standby mode.
28
.(30,.35).three.times.."03".will.flash.on.the.display.
.(30,.35).repeatedly,.until."00".flashes.on.the.display..The.indicator.light.
.(30,.35).three.times.."03".will.flash.on.the.display.
.(30,.35).repeatedly,.until."00".flashes.on.the.display..The.indicator.light.