GOAL ZERO VENTURE 70 Mode D'emploi page 4

CHARGE YOUR GEAR
Venture 70 is designed to charge POV cameras, phones, tablets, and other USB-powered devices.
Headlamp POV Camera Phone
10-20 Recharges 10 Recharges 5-6 Recharges
1. Using your charging cable or the included cables, plug into Venture 70's USB ports – they'll both work at
the same time so you can share power with a buddy.
2. The blue indicator lights will flash according to how quickly your gear is charging. A slow flash indicates a
slow charge, while quicker flashing indicates faster charging. If you're experiencing slow charge times, run
the smart charge sequence (see next section).
4
All manuals and user guides at all-guides.com
Tablet
2 Recharges
SMART CHARGE SEQUENCE
Venture 70's advanced smart charging feature allows you to optimize and adapt its USB outputs to charge your
gear as fast as possible. This sequence runs independently for both USB ports – meaning you can set different
charging profiles for each port. Fastest profiles will be applied and saved until reset or the sequence is run again.
1. With your gear plugged into Venture 70's USB port, press and hold the battery button for approximately 5
seconds to activate the smart charge sequence.
2. The blue indicator lights will begin to flash as different profiles are tested with your gear.
3. When the lights finish flashing, the fastest profile has been selected.
HOW IT WORKS: You might have noticed if you plug your device into a charger claiming a high output your
device still charges slowly. How quickly your device charges comes down to communication between the
charger and what you plug in. Every device has its own preference when it comes to charging, the challenge
is identifying the language used by the manufacturer to decode that preference. Venture 70's smart charging
feature acts as a translator, identifying your device's language, decoding and applying the fastest charging
profile possible, without overcharging or overheating. This feature makes Venture 70 one of the most
compatible chargers on the market.
We recommend running the smart charge sequence
anytime you experience slow charge times or when
plugging in new gear.
Battery Button
FLASHLIGHT
Venture 70 comes with a built-in 65 lumen multi-
mode flashlight with five settings: high, low, and
multiple strobe modes (including SOS).
1. Press the flashlight button to activate the
flashlight.
2. Press and hold the flashlight button for
approximately 5 seconds – all the lights will
flash once indicating you've entered flashlight
selection mode.
Flashlight
Blue Indicator Lights
3. With the flashlight button still held down, press
the battery button to cycle through 5 light
modes. The SOS setting is the 5th light.
Whichever mode you are in when you release the
flashlight button will become the default mode.
Avoid looking into the light when you turn it on – it's
pretty dang bright.
Flashlight Button
5