Publicité
Les langues disponibles
Les langues disponibles
1
2
3
1)
Thermostat
2)
Display operating temperature
3)
Main on/off key
Plug the power cord into a 220V outlet, Do not use multiple plugs.
Turn the unit with on/off switch(3), thermost. display indicates operating temperature,
the device is activated.
The machine takes a minimum of 16 hours to bring the cooling liquid up to operating
temperature (-30°/35°C).
There's a timer for each task. To set the timer press (7) or (8) for program cooling
time, press (6) to start the countdown, when countdown finish it can hear an acustic
alarm, press (6) to stop alarm. To reset display press together (7)(8) for 2".
N.B.: Thermostat is already programmed and locked, do not attempt to make changes
to the thermostat.
Take out bottle, turning it for a half
whether clockwise and counterclockwise.*
* Note: The bags are designed to ensure containment at the same time use at a tem-
perature of -40° C (tested for about 300/400 entries) and to allow the temperature is
reached in the shortest possible time. However, any material at this temperature is es-
pecially fragile, so it is recommended to pay particular care when entering / removing
the bottles, carefully following the instructions above.
All manuals and user guides at all-guides.com
USE AND REGULATION
4) Timer
5) Display timer
6) START/STOP countdown key
7) Minutes key
8) Seconds key
11
4
5
7 8
ENG
6
Publicité
