Publicité
Les langues disponibles
Les langues disponibles
Auto reconnection
When the BT-X50 is in off state, switch them on and it will reconnect
automatically to the last connected device if it is reachable.
SD-card mode
Insert a Micro-SD card (max. 32GB) in the device in on state. The
speaker will automatically play the songs from the SD-card. You can
also change the mode by press and hold the mode button (9).
AUX-Mode
Connect the AUX-cable to any sound-source you will operate with.
You can also change the mode by press and hold the mode button
(9) after the device is in on state. In AUX-Mode just the play/pause
button is useable. For changing tracks please use the source device.
How to use device functions
Make a call: to make a call, use your phone in the normal way
when the speaker is connected to your phone. The sound will be
transmitted to the speaker automatically.
Answer a call: when there is an incoming call, press the
play/pause button (9) of the speaker, or use the phone keys to
answer the call.
End a call: after finishing the call, press the play/pause button (9)
of the speaker, or use the phone keys to end the call.
Play/Pause music: short press the play/pause button (9) to play or
pause music. The speaker cannot play music by itself. If you want
to hear music via the speaker, you have to start the music track on
your Bluetooth device (e.g. Smartphone).
Troubleshooting
If you cannot connect the speaker to your phone, do as follows:
●Ensure that the speaker is charged and switched on.
●Ensure that the Bluetooth feature is activated on your phone.
●Check that the speaker is within 10m of your phone and that there
are no obstructions between the speaker and the phone, such as
walls or other electronic devices.
●The BT-X50 powers off or does not turn on again could be either a
low battery or a problem with the power supply charge the BT-X50.
(We suggest charging the BT-X50 all 2–3 months if it is not used for
a long time.)
Publicité
