CAME XDHD2704H Manuel De Configuration Et D'utilisation page 18

All manuals and user guides at all-guides.com
Double-click on the grid and a weekly schedule window will appear.
In WEEK DAYS select the day you want and click on ADD to set the
recording start time and end time.
Click on COPY to copy the settings just entered over to other days.
Choose OK to save the weekly schedule.
The operation to schedule recording is carried out for each CHANNEL,
but it is also possible to set the same schedule for all the channels by
selecting APPLY SETTINGS TO ALL and clicking on COPY.
Recording when motion detected
Recording is activated if the video camera detects motion within a pre-
set area of the image.
On the SETUP window choose SCHEDULE and then choose MOTION.
Enable motion detection by ticking ENABLE next to the channel (CH) on
which you want to activate recording when motion is detected.
Click APPLY to save the settings.
In the AREA box click on SETTING to set the detection area and
sensitivity.
Recording with sensor
The recording is activated when motion is detected by a sensor.
On the SETUP window choose SCHEDULE and then choose SENSOR.
Enable the sensor alarm by ticking ENABLE next to the channel (CH) on
which you want to activate recording with sensor.
Click APPLY to save the settings.
Then choose SCHEDULE to display the saved settings.