Johnson ICEBERGCP Guide D'utilisation page 99

Use " " to turn on/off "CURRENT STATE" or "ECO TIMER" ,
and use ''▼'', ''▲'' to adjust the start time and end time.
ECO MODE is valid only in heat mode (one zone).
If the ECO MODE is activated, the desired temperature
can not be adjusted on the interface.
If CURRENT STATE is ON and ECO TIMER is OFF, the
unit will run in ECO mode all the time; If CURRENT
STATE is ON and ECO TIMER is ON, the unit will run in
ECO mode according to the start time and end time.
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
CURRENT STATE
ECO TIMER
START
END
ADJUST
INFORMATION
i
32
ECO
MODE
ON
OFF
08:00
19 :00
V.1