Acson international C Serie Manuel D'installation page 9

Indoor unit
Air Intake
Air Discharge Nozzle
The indoor unit must be installed such that there is no short
circuit of the cool discharge. Respect the installation
clearance. Do not put the indoor unit where there is direct
sunlight on unit. The location is suitable for piping and
drainage and it must be have a large distance between a
door and unit.
Ceiling Concealed Mounting
– Use the hanger supplied with the unit.
– Make sure that the wall is sufficiently strong to withstand
the weight.
Center distance of axle (see drawing below)
A
L
All manuals and user guides at all-guides.com
INSTALLATION DIAGRAM
INSTALLATION OF THE INDOOR UNIT
1-3
Refrigerant Piping
Air Intake
CC A mm (inch)
10 C/CR 741 (29.2)
15 C/CR 881 (34.7)
20 C/CR 1041 (41.0)
25 C/CR 1176 (46.3)
28 C/CR 959 (37.8)
30 C/CR 956 (37.6)
38 C/CR 1264 (49.8)
40 C/CR 1076 (42.4)
50 C/CR 1326 (52.2)
60 C/CR 1526 (60.1)
Provide clearance for servicing ease and optimal air flow as
shown in the diagram.
Outdoor unit
L mm (inch)
225 (8.9)
225 (8.9)
225 (8.9)
225 (8.9)
339 (13.3)
266 (10.5)
401 (15.8)
266 (10.5)
266 (10.5)
266 (10.5)