Glem GFLP Instructions Pour L'usager page 17

3172618-001 ItIFPE.qxd:-
Pyrolysis is an automatic function and therefore
can only be activated from the timer programme.
To cancel a cleaning cycle it is necessary to reset
the oven, following the instructions below:
1 Set the control dial to position
2 Unlock the oven door.
3 Cancel the pyrolysis programme.
1 Set the control dial to position
oven will no longer heat up. Wait a few minu-
tes before continuing with the instructions to
unlock the door.
2 Unlock the oven door. To cancel the clea-
ning cycle, the oven door must be unlocked.
To do so, consider the following:
a) Unlocking the door 30 minutes after
the cleaning cycle. If the oven has been
operating for more than 30 minutes, the
door will unlock automatically once the
oven has cooled down to the safe tempe-
rature. Then, pilot light
All manuals and user guides at all-guides.com
30/1/13 12:50
CANCELLING THE PYROLYTIC CYCLE
.
. The
will switch off.
Página 17
b) Unlocking the door in the first 30 minu-
tes (at a low temperature). Within the
first 30 minutes the oven door will unlock
automatically. Follow the instructions
below:
1 Turn the control dial to position
2 Wait for approximately 1 minute.
3 Turn the control dial to position
4 Approximately, 1 minute later pilot
light will turn off and the oven door
can be opened.
3 Cancel the pyrolysis programme. To can-
cel the programme you must:
1 Turn the control dial to position
then to position
2 Press the
PIRO
3 Next, the timer display will show the
correct time and symbol
pear.
.
.
and
.
key for 3 seconds.
will disap-
17