connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
The following pieces may be washed in a dish-
washer (using a soft cleaning program):
- Skirt
- Pump Cap.
- For cleaning the heating coil, pump shaft and
blade use dish soap, a soft tooth brush and rin-
se under water. Do not rinse the top part of the
circulator including the main body in water.
- Then dry all parts before its assembly and
storage.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
- When the appliance work under an abnormal
mains disturbance it may lose performance and
maybe it is needed to be unplugged to recover
the normal operation.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.
STATEMENT OF COMPLIANCE
I hereby declare under our responsibi-
lity that the TAURUS product/s
described in this RONER CLIP manual
comply with the Regulations EN
60335-1, EN 60335-2-15, EN 62333, EN
55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 62321 and EN 50564 in accordan-
ce with the directives 2014/35/EU, 2014/30/EU,
2011/65/EU y 2009/125/EC.
Signed:
15/12/2016
A. Martí
Product Engineering