FEATURES
ES
32432
6W
PT
600LM
30 leds
EN
▶220-240V~50Hz
▶4.000K Daylight
FR
▶30.000 hours
▶These products contain a light source of energy efficiency class: F
INSTALATION
MIRROR CLIP
1. Connect supply lead with terminal, brown to brown(L)and
blue to blue(N).
2. Fix the luminaire to the mirror(≤7mm) with plastic screw.
SURFACE
1: Fix the light fixture on top of cabinet light with screws.
Instruction manual
32433
32434
8W
12W
800LM
1270LM
40 leds
60 leds
2: Connect supply lead with terminal, brown to brown(L)and
blue to blue(N)
3: Fix the luminaire to the light fixture with plastic screw.
WALL MOUNTED
1. Drill two holes (Ф6)on the wall, and the distance between
two holes is 80.5-85.5mm, put the expansion screws into the
holes.
2. Fix the mounting bracket with screws.
3. Connecting supply lead with terminal block, brown to
brown(L)and blue to blue(N).
4. Lock the luminaire to the bracket with screw.
INSTRUÇÕES DE INSTALAÇÃO
▶The manufacturer does not accept any responsibility for injuries or
damage resulting from improper use of the light.
▶Maintenance of the lights is limited to the surfaces. When doing
this, no moisture must come into contact with any areas of the
terminal connections or mains voltage control parts.
▶Do not install light on unstable or deformed surfaces.
▶Do not install on or above the high-temperature surface.
▶There must be no corrosive, explosive or flammable materials around
the lamp. The lights should avoid violent vibration or strike.
Attention! Before starting the installation work, make sure that the
mains power line is voltage-free-turn off safety cutout or unscrew
the protection fuse. The switch must be"OFF".
Warning! Before drilling the mounting holes, make sure that no
gas, water or electricity pipes and wires can be drilled through or
12
ref. 32432
32433, 32434