Klarstein 10033285 Mode D'emploi page 25

All manuals and user guides at all-guides.com
Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one shown in section "Installation (Vent outside)", except the
chimney assemble.
Installing the Carbon Filter
Note: An activated carbon filter is not included. But you can buy it as an extractor
hood.
1 Activated carbon filter can be used
to trap odours.
Note:
• Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.
• When activated carbon filter attached, the suction power will be lower.
2 In order to install the activated
carbon filter, the grease filter
should be detached first. Press the
lock and pull it downward.
3 Plug the activated carbon filter
into the unit and turn it in clockwise
direction. Repeat the same on the
other side.
EN
25