Panasonic AW-PH400 Manuel D'instructions page 43

Parts and their function
1
2
3
4
1 Rotary ring
2 Camera mounting screw (U1/4"-20UNC)
After mounting the camera, secure it firmly using this
screw.
3 Camera mounting plate
Mount the camera on this plate using the camera
mounting screws.
4 Camera mounting plate anchoring screws
After mounting the camera on the camera mounting
plate, anchor it to the roll unit using these screws.
5
5 Roll unit anchoring screw holes
This is where the roll unit is secured to the rotary arm of
the pan/tilt head.
6 Pan/tilt head connector
Connect this to the OPTION connector on the pan/tilt
head using the pan/tilt head connecting cable supplied.
42 (E)
Roll Unit AW-RL400
6