Panasonic AW-PH400 Manuel D'instructions page 32

Pan/Tilt Head Controller AW-RP400
Example of rack mounting
$ How to change the direction of the connector panel
1 Remove the five bottom panel screws, and remove the
blank panel.
2 Remove the five rear panel screws, and remove the
connector panel.
3 Secure the connector panel to the bottom panel using the
screws.
4 Secure the blank panel to the rear panel using the
screws.
Remove the blank
panel.
Remove the
connector panel.
Connector panel
Blank panel
31 (E)
Screws!5 (bottom panel)
Screws!5
(rear panel)
Screws!5 (bottom panel)
Screws!5
(rear panel)