Akasa Integral NMAX Mode D'emploi page 3

INTRODUCTION
Thank you for purchasing an akasa Integral NMAX external hard drive enclosure. It
enables you to connect SATA, SSD (solid state drive) or IDE HDD to a computer
via fast and convenient USB2.0 or blazingly fast eSATA interface. It is suitable for
standard 9.5mm as well as the deeper 2.5mm hard drives. Easy to install with no
driver installation required. Perfect for transfer, backup or storage of photos,
music, video or recovering data from an old system.
PACKAGE CONTENTS
• Akasa Integral NMAX 2.5" SATA enclosure
• USB2.0 data cable
• USB-to-DC Power cable
• eSATA Cable
• User's Manual
USB Data cable
FEATURES
• Suitable for 2.5" IDE, SSD and SATA I/II hard drives
• Sleek black finish aluminium body and mesh front panel provide efficient HDD cooling
• Compatible with 9.5 and 2.5mm high HDD
• Dual interface: eSATA and USB2.0
• No software installation required
• Blue LED power on and data transfer indication
• Compact design for easy portability
MANUAL CONTENTS
• Introduction
• Hard Disk Installation
• USB Connection
• eSATA Connection
• Hard Disk Formatting
• FAQ
2
All manuals and user guides at all-guides.com
HDD Installation
USB-to-DC cable eSATA Data cable
SPECIFICATIONS
• Internal interface: IDE and Serial ATA I / II
• External interface: eSATA, USB2.0 ( . backward compatible)
• Transfer rates: up to 480Mb/s on USB 2.0 and up to .0Gb/s on eSATA
• Power and data transfer indicator: Blue LED
• Case material: aluminum with metal mesh front panel
• Weight: 70g (without a HDD)
• Dimensions: 6mm (L) x 8mm (W) x 20.6mm (H)
• Power requirements: 5V DC
o
• Operating Temperatures: 5 to 50 C
o
• Storage Temperatures: -40 to 70 C
• Operating Humidity: 5 to 90%, non-condensing
SYSTEM REQUIREMENT
PC Requirements
• Minimum Intel Processor Pentium II 50MHz, 64MB RAM
• Windows 2000 / XP / VISTA
• Active USB or eSATA port
MAC Requirements
• Minimum Apple G processor, 64MB RAM
• Mac OS 9 and higher
• Active USB or eSATA port
BACK PANEL ARRANGEMENT
eSATA
USB Port eSATA port
HDD Installation
USB eSATA
DC IN
DC 5V Power Input USB/eSATA
switch