Publicité
Les langues disponibles
Les langues disponibles
Bluetooth™
The YSC-Mobile is capable of receiving streaming audio over Bluetooth™ from devices such as smart phones, tablets and
laptops. Pairing your device with the YSC-Mobile is simple and gives you the freedom to play your music wirelessly.
Pairing: When the Pairing Button is depressed for 4 seconds and then released, the Bluetooth™ audio
connection is available for pairing.
Status: The blue status indicator alerts the user to the current status of the Bluetooth™ connection. A fast
blinking light indicates an available, unpaired connection. A slow blinking blue light is pairing mode waiting to
pair, and a steady (solid) blue light is paired and audio is available to Channel 3.
Level Control: The Channel 3 Level control is used to set the audio level for the Bluetooth™ connection. Level
may also be controlled directly at your streaming device.
The YSC-Mobile's Bluetooth™ operating range is rated for 10 meters (33 feet) line of sight. The quality of the link
can be affected by an excess of traffic in the 2.4 GHz bandwidth or structures between the YSC-Mobile and the
streaming device.
Note: When connected with Bluetooth™, ALL audio is streamed from your device. If you don't want your
streaming music to be interrupted, turn off 'notifications' on your device.
Channel Controls
1. Level Control
The YSC-Mobile features active channel input circuitry with exceptionally high audio headroom. The Level control adjusts
the channel gain over an 85 dB range. Use this control to adjust the channel's level in the overall system mix.
2. Shape Control
Setting this control towards 'Music' shapes the response to be suited for reproducing
prerecorded music while setting the control towards 'Speech' accentuates the mid-
frequencies which help speech and vocals. The response is flat in the center position.
3. Effects Control
This control determines how much of the selected effect (see "Effect Selector" in the
"Master Section" portion of this manual) is applied to the corresponding channel.
Master Section
1. Master Control
The Master Control is used to set the overall level of the YSC-Mobile.
Note: When two systems are linked together, the Master Control only affects the
level of the unit on which it is located.
2. Effects Selector
Three effects are available with this control, as well as an off (no-effects) position. The
effects are Delay, Hall Reverb and Room Reverb. The selected effect is available to all 3
input channels and the amount of effect applied is controlled by the individual channel's
effects knob.
Note: If effects are not in use, set this switch to the off position to help conserve battery
life.
Link Section
In situations where additional bass or input channels are needed, The Link jacks can be
used to connect multiple YSC-Mobile systems and/or a subwoofer.
1. Link Jacks
The Link jacks are in parallel and we have provided both a male and female XLR to
help make it more convenient to 'link' YSC-Mobile enclosures together. To use the Link
feature, insert a standard XLR patch cable between cabinets.
Pairing:
Hold for 4 seconds
3
MA S T E R
Min
Max
Room
Hall
Delay
Off
EFFECTS
MAIN
Output
MAIN
Input
To LINK, Connect
the MAIN Output to
the MAIN Input of
another powered
speaker cabinet
Publicité
