GreenWorks VUG403 Manuel D'opérateur page 12

EN
7. Turn the strainer (26) counter-clockwise and remove
it.
26
8. Shake the filter and let the debris out of it.
9. Run water through the filter from a hose or spigot.
10. Allow the filter to dry before you store or picking up
debris.
Do not operate the machine without collection bin or
filter.
10.2 CLEAN THE BRUSH ROLL
Turn off the machine before maintenance or
troubleshooting to reduce the risk of electric shock or
injury.
1. Press the release button (8) to disconnect the floor
brush (4) from the vacuum.
25
WARNING
WARNING
English
2. Push the brush roll release button (27) so the side
plate (28) will release.
3. Lift the side plate (28).
27
4. Take the brush roll (29) out.
5. Clean up the debris and hairs.
6. Run water through the brush roll from a hose or
spigot.
7. If your brush roll chamber is dirty, use the rag or
towel to clean it.
12
8
4
4
28
4
29