NOMA 052-7813-0 Manuel D'instructions page 2

LED AREA LIGHT
model no. 052-7813-0 | contact us: 1.888.543.1388
6. Remove knockout on bottom of cover plate (4) and feed supply wires through
hole. Note: This fixture is intended for use with conduit connectors, conduit
and junction box that are UL-listed suitable for wet locations and are properly
installed and grounded.
7. Ground fixture: Use wire nut to connect the (copper) supply ground wire and
the (green) fixture ground wire.
Note: If wiring does not include a ground wire, consult your local electrical code
for approved grounding methods.For proper connection, place wire nut over
wires and twist clockwise until tight.
8. Connect supply wires: Use wire nuts to connect the black fixture wire to the
black power supply wire and the white fixture wire to the white (neutral) supply
wire.
9. Secure cover plate: (4) to housing with two 3/8" (9.5 mm) bolts (3).
This product carries a one (1) year warranty against defects in workmanship and materials. Noma Canada agrees
to replace a defective product, within the stated warranty period, when returned to the place of purchase with
proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
MADE IN CHINA
Imported by Noma Canada
Toronto, Canada M4S 2B8
All manuals and user guides at all-guides.com
Instruction Manual
For outdoor use
Retain carton for storage purposes
Cover Plate
3/8" Bolt
2" Screws
Wire Nut