LevelOne WAP-6015 Guide D'installation Rapide page 3

All manuals and user guides at all-guides.com
Power LED
LED / Button /
Interface
Power
WLAN
LAN
Reset
LAN LED
WLAN LED
Description
The Device is powered LED will be on
when AP is powered on.
When there are devices normally
connected to
corresponding indicator light will be
on.
Link/Act LED will blink when there is
traffic on that port
The LAN port is used to connect to
network devices, such as a switch.
With the AP powered on, press the
Reset button with a bent paperclip for
5 seconds until the Link/Act LED
goes off. The AP Will restart itself and
reset the device to factory default
settings.
3
port, the port