Simfer S 2350 WT Manuel D'utilisation page 4

All manuals and user guides at all-guides.com
Safety Instructions
This device is manufactured in compliance with safety regulations. Usage against the
rules causes harm to person and device.
Please read the User Manual carefully before operating the device. You will find
important informations inside the User Manual regarding mounting, safety, usage and
maintenance. Thus you will both protect yourself and prevent the device from coming to
harm.
If the power cord is damaged, it must be replaced by the manufacturer or its service
agency or a personel qualified in the same degree to prevent a dangerous situation.
It must be checked whether there are breaks or deformations on the heating
element present on the device. If glass panels are damaged, the heater must not be
used. Authorized service must be called.
It must be ensured that the main power is 220-240V AC, 50-60 Hz and the power
line is connected to the fuse. Mains safety must be checked. Fuse must be 16
Amperes. Your device must be used with grounded socket and grounded socket
must be outside the heater area and the hot surface. Also, it must be checked
whether the socket is loose or damaged. Because loose sockets damage the device
and the power main.
Your device must not be used connected to the same power cable or fuse with
another device.
Power cord must not be left on the hot body of the device or near it.
If your device will not be used for a long period of time, if cleaning or maintenance will be
conducted, the device must be unplugged. It must be ensured that the device has
cooled down.
The device is not intended for use by persons (including children) with reduced
physical, sensory and mental capabilities or lack of experience and knowledge, unless
they have been given supervision or ınstruction concerning the use of the appliance by
a person responsible for their safety.
3