Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Maintenance and Cleaning
Maintenance
It is very important to perform careful and regular maintenance of the device in accordance with
the recommendations made in this manual so that it can run efficiently for a long time.
1. The cleanliness of the reflector (reflecting mirror) and tubes must be checked at least once a
month by the user. The cleaning and maintenance instruction must be applied if dirty.
2. According to the amount of dust in the place of use, the said checks should be performed
more often.
3. Power cable and plug must be checked while cleaning the device. If there is a deformation in
the power cord or the plug, it must be taken to the authorized service.
4. Reflector, wire and body deformation must be visually inspected while cleaning the device. If
there is a deformation, authorized service must be called for things to do.
5. It is recommended that the reflector is changed every two years for the device to run more
efficiently. Reflector must be changed by the authorized service.
A clean reflector ensures the maximum level of heating efficiency.
Cleaning
Attention! Regular and careful cleaning performed by the user will ensure that your device will
run more efficiently and prolong its life.
1. Your device must be turned off before starting to clean, its power cord must be unplugged
from the socket for safety and you must wait until it cools down.
2. If the reflector (reflecting mirror) and carbon flament tube is dirty, it must be cleaned from the
outside with dry air without opening the protective cage wire of the device, if possible.
3.The outer surface of the device must be cleaned with a soft cotton cloth or a soft brush.
4.Never use corrosive or melting liquids to clean the heater. These materials may damage the
plastic parts.
5. Do not clean your device using vapor cleaners.
11
Publicité
